ITR Pirelli Trapper

Construction:
   Tube: Seamless black synthetic rubber. Oil resistant.
   Reinforcement: Two special braids of high-tensile steel wire. Two braids of compact hose according to one braid dimensions. The hose exceeds requirements of SAE  100 R2/AT or DIN 20022 2SN hose, with excellent impulse performances exceeding 400,000 cycles with ITR Coupling.
   Cover: Black synthetic rubber. Resistant to abrasion, oil, fuel and weathering.
Temperature: -40F to 200F with peaks up to 250F  (-40C to 120C)
Category: High Pressure Hose

I.D. Size I.D. Tolerances O.D. (in) Braid Diameter Pressures (psi) Min Bend
Radius
Weight (lbs)
Per 100 Ft
in mm + - Min Max Min Max Working Min Burst
1/4 6.5 4 - 0.244 0.276 - 0.555 0.417 0.461 5,850 23,400 3.0 19
5/16 8.0 5 - 0.303 0.335 - 0.618 0.476 0.524 5,500 22,000 3.5 23
3/8 9.5 6 - 0.366 0.398 - 0.713 0.571 0.618 5,100 20,400 3.5 29
1/2 13.0 8 - 0.484 0.531 - 0.846 0.689 0.748 4,400 17,600 5.0 39
5/8 16.0 10 - 0.610 0.657 - 0.972 0.811 0.874 4,050 16,200 6.5 44
3/4 19.0 12 - 0.732 0.779 - 1.126 0.968 1.031 3,450 13,800 8.0 54
1 25.0 16 - 0.984 1.039 - 1.441 1.279 1.342 2,700 10,800 10.0 81
1 32.0 20 - 1.236 1.229 - 1.764 1.457 1.642 2,400 9,600 14.5 114